Apc Network Management Device Ip Configuration Wizard

 admin

Is this the NIC card you have installed in your UPS?

If so, have you tried using the 'Network Management Device IP Configuration Wizard' to configure it? If you don't have that application, you can download it from here:

Apc Network Management Device Ip Configuration WizardWizard

Apc Network Management Device Ip Configuration Wizard V5.0.3 Download

Apc network management device ip configuration wizard reviewsApc network management device ip configuration wizard free

Apc Network Management Device Ip Configuration Wizard Free

Apc Network Management Device Ip Configuration Wizard

If you don't care about the configuration on the AP9617, you could do a factory reset. That will cause it to try to obtain an IP address via DHCP, but unfortunately it will ignore responses that don't have a special 'magic cookie' option set. But the APC Device IP Configuration Wizard should see it and let you configure the IP address.

Apc Network Management Device Ip Configuration Wizard

Connect your UPS to the same network as the computer you are using to configure it. You can install the configuration wizard and follow the step-by-step instructions that you can find on that same page. I haven't done it in a while but from what I remeber it is very straight forward with that software.

Apc Network Management Device Ip Configuration Wizard Download

Lastly, Java needs network access. In addition, an Administrator needs to execute and run the Device IP Configuration Wizard. The Device IP Configuration uses the following process in order to try and set an IP address. If they fail for some reason, this tool will not work. Arp -s ipaddress. APC Device IP Configuration Wizard You can use the APC Device IP Configuration Wizard at a computer running Microsoft® Windows® 2000, Windows Server® 2003, or Windows XP to discover unconfigured Network Management Cards and configure their basic TCP/IP settings, one card at a time, over the network. The Device IP Configuration Wizard is a Windows application designed specifically to remotely configure the basic TCP/IP settings of network management cards. The Wizard runs on Windows® 2000, Windows 2003, Windows Vista, Windows XP, Windows 7, Windows Server 2008, Windows 8, Windows 10, and Windows 2012. This utility supports network.